Questions about this plan? Visit BuilderHousePlans.com today or call 1-877-222-1762
View plan at /plan/13616-square-feet-5-bedroom-5-00-bathroom-0-garage-sp192716
Full Specs & Features
Height : 44' 4"
Width : 159'
Second Floor: 5968 sq/ft height 12'
Upper Ceiling Ft : 12'
Roof Framing : stick
Roof Load : 40
Roof Type : Shingle
Framing : 2"x4"
Bar:
340 sq/ft width 18' 4" x depth 18' 7"
Bedroom 2:
317 sq/ft width 15' x depth 21' 2"
Bedroom 3:
317 sq/ft width 15' x depth 21' 2"
Bedroom 4:
360 sq/ft width 17' 2" x depth 21'
Bedroom 5:
238 sq/ft width 17' x depth 14'
Computer Room:
315 sq/ft width 20' 4" x depth 15' 6"
Dining Room:
359 sq/ft width 23' 2" x depth 15' 6"
Entry:
562 sq/ft width 18' 4" x depth 30' 8"
Foyer:
170 sq/ft width 17' x depth 10'
Garage:
614 sq/ft width 26' 4" x depth 23' 4"
Garage Two:
614 sq/ft width 26' 4" x depth 23' 4"
Grand Salon:
850 sq/ft width 21' x depth 40' 6"
Keeping Room:
455 sq/ft width 21' 8" x depth 21'
Kitchen:
435 sq/ft width 29' x depth 15'
Library:
322 sq/ft width 14' 8" x depth 22'
Master Bedroom:
440 sq/ft width 26' 2" x depth 16' 10"
Play Room:
295 sq/ft width 18' 10" x depth 15' 8"
Port Cochere:
977 sq/ft width 33' 4" x depth 29' 4"
Sky Room:
541 sq/ft width 35' 4" x depth 15' 4"
Floor Plan - Main Floor
Floor Plan - Upper Floor
In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.
To find out what documents you should expect with your house plans, see /help/faq#faq13.
In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.
Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.
Note: All sales on house plans are final. No refunds or exchanges can be given once your order has been fulfilled or once we have begun to customize a home plan to your specifications.